ECU/PDM/ELECTRONIC SYSTEM

Haltech Driveshaft Split Collar - 2.125" / 53.98mm I.D. 8 Magnet

Haltech Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup split collar - suits 2.125" / 53.98mm Driveshaft  

Haltech Driveshaft Split Collar - 2.187"\ 55.55mm I.D. 8 Magnet

Haltech Driveshaft Split Collar 2.187" / 55.55mmI.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.187"\ 55.55mm I.D. 8 Magnet Notes: 8 magnet pickup split collar - suits 2.187" Driveshaft    

Haltech Elite CAN Cable - DTM4 Receptacle to 16 Pin Black Tyco - Length: 150mm / 6"

Haltech Elite CAN Cable - DTM4 Receptacle to 16 pin Black Tyco - 150mm / 6"   Suits: Compatible Elite 550/750 Plug "n" Play Adaptor harness Includes: 1 x DTM4 Receptacle to Tyco 16 Position Connector  

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 1200mm (48")

Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 1200mm (48")

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 150mm (6")

Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 150mm (6")

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 1800mm (72")

Haltech Elite CAN Cable DTM-4 - 8 pin Black Tyco 1800mm (72")

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 300mm (12")

Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 300mm (12")  

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 600mm (24")

Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 600mm (24")  

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 900mm (36")

Haltech Elite CAN Cable DTM-4 - 8 pin Black Tyco 900mm (36")

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 1200mm (48")

Haltech Elite CAN Cable DTM-4 to DTM-4 1200mm (48") Includes: 1 x DTM-4 to DTM-4 CAN Cable   

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 150mm (6")

Haltech Elite CAN Cable DTM-4 to DTM-4 150mm (6")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 1800mm (72")

Haltech Elite CAN Cable DTM-4 to DTM-4 1800mm (72")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 2400mm (92")

Haltech Elite CAN Cable DTM-4 to DTM-4 2400mm (92")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 3000mm (120")

Haltech Elite CAN Cable DTM-4 to DTM-4 3000mm (120")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 300mm (12")

Haltech Elite CAN Cable DTM-4 to DTM-4 300mm (12")   Includes: 1 x CAN Connection Cable  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 3600mm (144")

Haltech Elite CAN Cable DTM-4 to DTM-4 3600mm (144")

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 600mm (24")

Haltech Elite CAN Cable DTM-4 to DTM-4 600mm (24")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 75mm (3")

Haltech Elite CAN Cable DTM-4 to DTM-4 75mm (3")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 900mm (36")

Haltech Elite CAN Cable DTM-4 to DTM-4 900mm (36")

Haltech Elite CAN Cable DTM-4 to OBDII - Length: 1800mm (72")

Notes: Vehicle side OBDII Connector Connect your Elite ECU to an OBDII Bluetooth or Wireless Module

Haltech HC5 - Hydraulic Crimper

HC5 Hydraulic Crimper 5 TON Suits: 00 AWG to 12AWG cable. Includes: 1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets - (Sizes 4,6,10,16,25,35,50,70mm2) 1 x Hydraulic Rebuild Kit 1 x Moulded Carry Case 1 x Quick Start Guide

Haltech iC-7 Colour Display Dash

Suits: All currrent Haltech ECUs via CAN. Also Plug'n'Play compatible with the following aftermarket ECU brands: Link, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series- (M400,600,800 gold box ECUs), Syvecs. Includes: Haltech iC-7 Display...

Haltech iC-7 OBD-II Colour Display Dash

SUITS: Preconfigured to connect directly (via CAN) to most late model vehicles (approx 2008-on) using the factory OBD-II port.   INCLUDES: Haltech iC-7 Display Dash, 34 Pin main connector harness (includes spare pins for input wiring), OBD-II to...

Haltech iC-7 OBDII to CAN Cable LENGTH: 1400mm / 55in

LENGTH: 1400mm / 55in   SUITS: Haltech iC-7 Dash   INCLUDES: Cable and Fuse   Haltech Dash to OBD II CAN Cable allows the Haltech iC-7 Dash to display the data obtained from the vehicles OBD II system in real time.

Haltech iC-7 Stand-Alone "Classic" Kit - Size: 7in

  Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electronically tested before packaging and are sold "as is" and without any further warranty...

Haltech M10 x 1.0 to 1/8 BSPT Adaptor

M10 x 1.0 to 1/8 BSPT Adaptor - Stainless Steel Suits: Bosch Fluid Pressure and Temperature Sensor - HT-010920 Includes: 1x M10x 1.0 to 1/8 BSPT Adaptor Notes: Use with Bosch Fluid Pressure and Temperature Sensor - HT-010920  

Haltech M10 x 1.0 to 1/8 NPT Adaptor

M10 x 1.0 to 1/8 NPT Adaptor - Thread: M10 x 1.0 Female to 1/8NPTF Male Suits: Bosch Fluid Pressure and Temperature Sensor - HT-010920 Includes: 1x M10x 1.0 to 1/8 NPT Adaptor Notes: Use with Bosch Fluid Pressure and Temperature Sensor -...

Haltech O2 Sensor Weld-On Bung - 303 Stainless Steel

O2 Sensor Weld-On Bung - 303 Stainless Steel   THREAD: M18 x1.5   INCLUDES: 1 x weld-on bung - 303 Stainless Steel, 1 x copper washer and 1 x blanking plug.

Haltech O2 Sensor Weld-On Bung - 6061 Aluminium - Thread: M18 x 1.5

O2 Sensor Weld-On Bung - 6061 Aluminium Suits: M18 thread oxygen sensors. Includes: 1 x 6061 aluminium weld-on bung.

Haltech Tyre Cover - Size: 106cm x 91cm ( 42" x 36")

Haltech Tyre Cover Size: 106cm x 91cm ( 42" x 36") Keep the sun off your tyres and help maintain consistency in your tyre pressures. Includes 7 suction cup mounting points for mounting to steel or fibreglass bodies. To assemble, pull the included suction...

Haltech uC-10 Digital Dash - Size: 10in

OBDII functionality requires adapter cable HT-135003 (sold separately).   Suits: All current Haltech ECUs via CAN. Also Plug'n'Play compatible with the following aftermarket ECU brands: Link G4, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred...

Haltech Weld Fitting - Aluminum - Thread: 3/8 NPT 18 TPI

Weld fitting 3/8 NPT - Suit large air temp - Aluminum Suits: Air temp sensor - Large thread and coolant temp sensor - Large thread.  

Haltech Weld Fitting - Aluminum - Thread: M14 x 1.5

Weld fitting M14 x 1.5 - Small thread air temp - Aluminum Suits: Air temp Ssensor - Small thread.

Haltech Weld-On Fitting 1/8 NPT - 27 TPI - 6061 Aluminium - Size: 20.4mm x 13mm

Weld fitting 1/8 NPT - 27 TPI - 6061 Aluminium Includes: 1 x 1/8 NPT weld-on fitting  

Hardwire Electronics PDM 10 Module

A PDM (Power Distribution Module) is a device used to replace conventional relays and fuses in a vehicle electrical system. The Hardwire Electronics PDM takes inputs from physical switches or analogue voltages, and provides power to different...

Hardwire Electronics PDM 15 Module

PDM 15 A PDM (Power Distribution Module) is a device used to replace conventional relays and fuses in a vehicle electrical system. The Hardwire Electronics PDM takes inputs from physical switches, analogue voltages, or the CAN bus, and provides...

Harness Sleeve Pack

Harness Sleeve Pack Includes: Nylon Sleeve 6mm x 10m 8mm x 5m 14mm x 2m 25mm x 1m Heatshrink glue lined 8mm x 1.2m 12mm x 0.6m 19mm x 0.3m 35mm x 0.12m Cable ties Small (100mm) x 20 Medium (200mm) x 10 Fleece Tape 1 x Roll Notes: Protect your cables and...

High Output CDI Coil

High Output CDI Coil Includes: Matching Delphi plug and pins.  

High Output IGN-1A Inductive Coil to GM LS V8 Adaptor Sub-Harness

8 Channel IGN-1A Inductive Coil to GM LS V8 Adaptor   Suits: A direct Plug 'n' Play solution to add high output IGN-1A inductive coils to all Haltech LS V8 terminated engine harnesses with the the OEM style 7 Pin coil harness connector. Must be in...

High Output IGN-1A Inductive Coil with Built-In Ignition Module

High Output IGN-1A Inductive Coil with Built-In Module Includes: Matching plug and pins. IGN1A