ECU/PDM/ELECTRONIC SYSTEM

Link CAN Keypad Insert - Purge

CAN Keypad Insert - Purge CAN Keypad button insert. For use with Link CAN Keypads. 

Link CAN Keypad Insert - Start/Stop

CAN Keypad Insert - Start/Stop CAN Keypad button insert. For use with Link CAN Keypads. 

Link CAN Keypad Insert - Traction Control

CAN Keypad Insert - Traction Control CAN Keypad button insert. For use with Link CAN Keypads. 

Link CAN Keypad Insert - Traction Control Decrease

CAN Keypad Insert - Traction Control Decrease CAN Keypad button insert. For use with Link CAN Keypads. 

Link CAN Keypad Insert - Traction Control Increase

CAN Keypad Insert - Traction Control Increase CAN Keypad button insert. For use with Link CAN Keypads. 

Link CAN Keypad Insert - Water Injection

CAN Keypad Insert - Water Injection CAN Keypad button insert. For use with Link CAN Keypads. 

Link CAN Keypad Insert - Wipers

CAN Keypad Insert - Wipers CAN Keypad button insert. For use with Link CAN Keypads. 

Link CAN Lambda - (CANLAM)

Link CAN Lambda - (CANLAM) Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.  If using the CAN Lambda with a G4+/G4X PlugIn ECU use a...

Link CAN Splitter Cable - CANTEE

Link CAN Splitter Cable - CANTEE CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices.   Specs DTM4 Female to 2 x DTM4 Male. Includes CAN and Power Wiring.  Loom 1 Length:...

Link CANEXT - CAN Extension Cable - 2m

Link CANEXT - CAN Extension Cable - 2m 2 metre CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s.   Specs DTM4 Female to DTM4 Male. Includes CAN and Power Wiring. Length: 2 metres   DTM4 Pin...

Link CANJST - CAN Connection Cable for Plugin ECU's (5 Pin)

Link CANJST - CAN Connection Cable for Plugin ECU's (5 Pin) Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead. Terminates...

Link CANJST4 - CAN Connection Cable for Plugin ECU's (4 Pin)

Link CANJST4 - CAN Connection Cable for Plugin ECU's (4 Pin) Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older 5pin CAN connector).  Plugs...

Link CANLTW - CAN Connection Cable for Wire-In ECU’s (6 Pin CAN)

Link CANLTW - CAN Connection Cable for Wire-In ECU’s (6 Pin CAN)   Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU.   Compatible...

Link CANSS - CAN Connection Cable for Wire-In ECU’s (ECU Header CAN)

Link CANSS - CAN Connection Cable for Wire-In ECU’s (ECU Header CAN) Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header.   Compatible ECU's: G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (CAN1)G4X/G4+ Storm...

Link Combined Pressure and Temperature Sensor (CPTS)

Link Combined Pressure and Temperature Sensor (CPTS)   Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Coolant, Fuel, Transmission fluid etc. Up to 10.0 bar...

Link Coolant Temperature Sensor (NTC1-8)

Link Coolant Temperature Sensor (NTC1-8) Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" BSP Thread

Link Coolant Temperature Sensor (NTC12)

Link Coolant Temperature Sensor (NTC12) Includes Plug Kit - 2 way Bosch Style plug, terminals and boot M12 Thread

Link Crank Angle Sensor (CAS)

Link Crank Angle Sensor (CAS) Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related products for our trigger wheel options...

Link Deutsch 2-Way Plug Kit - #PKD2F

Link Deutsch 2-Way Plug Kit - #PKD2F Deutsch 2-Way Plug Kit

Link Deutsch 3-Way Plug Kit (PKG3)

Link Deutsch 3-Way Plug Kit (PKG3) Deutsch 3 Way Plug Kit

Link Deutsch DTM4 Connector Kit (Female)

Link Deutsch DTM4 Connector Kit (Female) Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes Female Housing (Receptacle), Wedgelock & Pins.

Link Deutsch DTM4 Connector Plug Kit (Male)

Link Deutsch DTM4 Connector Plug Kit (Male) Deutsch DTM4 Connector Kit (Male) to create your own looms. DTM4 Male housing. Includes wedgelock and sockets.

Link Dual Core Cable - #C2C10

Link Dual Core Cable - #C2C10 Dual core screen cable for use with trigger signals and knock sensors - 10m per pack  

Link E-Throttle G4 (G4RET)

Link E-Throttle G4 (G4RET) Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above) to give you full control of your throttle setup, allowing a faster more...

Link Ethanol Content Sensor - #ECS

Link Ethanol Content Sensor - #ECS Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible...

Link Exhaust Gas Temperature Probe (EGT)

Link Exhaust Gas Temperature Probe (EGT) Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected...

Link G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK)

Link G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK) Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race...

Link G4+ Thunder

Link G4+ Thunder The Thunder is designed for high end applications requiring maximum performance, flexibility and tuning control. The Thunder has more inputs, more outputs and more features than any other Link ECU. The Thunder has all the features found...

Link G4+ Xtreme

Link G4+ Xtreme The Xtreme has Peak and Hold Injection, built in E-throttle and all the advanced features including Anti-lag, Cruise Control and Traction Control With 8 Peak and Hold Injector drives and 8 ignition drives the Xtreme can control up to 4...

Link G4X AtomX

Link G4X AtomX The Link G4X AtomX ECU is the latest version of our entry-level ECU. Don't let its size fool you however, the AtomX has expanded data logging and uses the same microcontroller as the entire G4X range! It is more responsive and has higher...

Link G4X FuryX

Link G4X FuryX The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. Now on the G4X platform, the FuryX features a faster processor, faster communications & a huge 512 megabytes of data logging! With 8...

Link G4X MonsoonX

Link G4X MonsoonX The MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data at a faster sample rate. Control loops are also more precise compared to its G4+ predecessor, along with advancements such as...

Link G4X StormX

Link G4X StormX The Link G4X StormX ECU is the latest version of our trusty, mid-sized ECU. With eight injector and eight ignition drives, it allows sequential injection and direct spark on engines with up to eight cylinders or four rotors. The StormX...

Link G4X XtremeX

Link G4X XtremeX The XtremeX has built in E-throttle and all the advanced features including Anti-lag, Cruise Control and Traction Control.With 8 Injector drives and 8 ignition drives the XtremeX can control up to 4 rotors or 8 cylinders with sequential...

Link Housing & Terminals (TK G1 LEM)

Link Housing & Terminals (TK G1 LEM) To suit G1 models. 17 way housing and terminals

Link Housing & Terminals (TK G3 LEM)

Link Housing & Terminals (TK G3 LEM) To suit G3 LEM models only. 26 way housing and terminals.

Link Knock Sensor (KNS)

Link Knock Sensor (KNS) Donut style 8mm hole Includes plug and pin kit 

Link Knock Sensor with Loom (KNSB)

Link Knock Sensor with Loom (KNSB) Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.

Link KnockBlock G4+ (KNB)

Link KnockBlock G4+ (KNB) The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mechanical issues. It is used it with ear buds, headphones or noise cancelling ear...

Link KnockLink G4 (G4KNL)

Link KnockLink G4 (G4KNL) KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock sensor to function (sold separately) or you can purchase the KnockLink Kit that includes...