null

ECU/PDM/ELECTRONIC SYSTEM

Our ECU, PDM & Electronic System Range

  • Link Loom Crimping Tool (CTS)

    Link Loom Crimping Tool (CTS)

    Link Loom Crimping Tool (CTS) Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors. 
    £108.80
  • Link Loom Crimping Tool (CTSS) Link Loom Crimping Tool (CTSS)

    Link Loom Crimping Tool (CTSS)

    Link Loom Crimping Tool (CTSS) Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors. 
    £116.00
  • Link Mounting Boss (IAT1-8MA)

    Link Mounting Boss (IAT1-8MA)

    Link Mounting Boss (IAT1-8MA) Weld-in aluminium boss, 1/8" BSP thread. Suitable for mounting intake air temperature (IAT1-8), coolant temperature sensors (NTC1-8), and other sensors that use 1/8" BSP thread.
    £21.60
  • Link Mounting Boss (IAT1-8MS)

    Link Mounting Boss (IAT1-8MS)

    Link Mounting Boss (IAT1-8MS) Weld-in steel boss, 1/8" BSP thread. Suitable for mounting intake air temperature (IAT1-8), coolant temperature sensors (NTC1-8), and other sensors that use 1/8" BSP thread.
    £18.00
  • Link Mounting Boss - Aluminium (IATBMA) Link Mounting Boss - Aluminium (IATBMA)

    Link Mounting Boss - Aluminium (IATBMA)

    Link Mounting Boss - Aluminium (IATBMA) Weld-in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange.
    £35.60
  • Link Mounting Boss Steel (IATBMS)

    Link Mounting Boss Steel (IATBMS)

    Link Mounting Boss Steel (IATBMS) Weld-in steel boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch-style flange.
    £21.60
  • Link MXG Strada 7" Dash - Race Edition

    Link MXG Strada 7" Dash - Race Edition

    Link MXG Strada 7" Dash - Race Edition Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Race Edition is a full colour, 7-inch dash display with 10 RGB shift lights and eight customisable alarm LED lights. The dash is pre-configured to...
    £1,472.00
  • Link MXG Strada 7" Dash - Street Edition

    Link MXG Strada 7" Dash - Street Edition

    Link MXG Strada 7" Dash - Street Edition Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash...
    £1,472.00
  • Link MXS Strada 5" Dash - Race Edition

    Link MXS Strada 5" Dash - Race Edition

    Link MXS Strada 5" Dash - Race Edition Link MXS Strada 5" Dash, powered by AIM.The Link MXS Strada Race Edition is a full colour, 5-inch dash display with 10 RGB shift lights and six customisable alarm LED lights. The dash is pre-configured to work with...
    £1,224.00
  • Link MXS Strada 5" Dash - Street Edition

    Link MXS Strada 5" Dash - Street Edition

    Link MXS Strada 5" Dash - Street Edition Link MXS Strada 5” dash, powered by AIM.The Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash...
    £1,224.00
  • Link O2 Bung and Plug

    Link O2 Bung and Plug

    Link O2 Bung and Plug Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.
    £35.60
  • Link Pin Kit A - #TKA

    Link Pin Kit A - #TKA

    Link Pin Kit A - #TKA Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be required for the Storm/Fury/Xtreme) Link G4+ Atom (NB: Does NOT suit the...
    £56.00
  • Link Pin Kit B - #TKB

    Link Pin Kit B - #TKB

    Link Pin Kit B - #TKB Equivalent plug and connectors as "B" Loom. Plug and Pin Kit only.Suitable for: Link G4X Storm (Loom A/Pin Kit A also required) Link G4X and G4+ Fury (Loom A/Pin Kit A also required) Link G4X, G4+ and G4 Xtreme (Loom A/Pin Kit A...
    £56.00
  • Link Pin Kit C - #TKC

    Link Pin Kit C - #TKC

    Link Pin Kit C - #TKC Housing and 26 terminals for C connector. Plug and Pin Kit Only.Suitable for: G4+ Thunder Obsolete G4 Atom and Lightning. (Not G4+ or G4X Atom)
    £56.00
  • Link Pin Kit D - #TKD

    Link Pin Kit D - #TKD

    Link Pin Kit D - #TKD Housing and 26 terminals for D connector. Plug and Pin kit only.Suitable for: G4+ Thunder
    £56.00
  • Link Plug (CANF)

    Link Plug (CANF)

    Link Plug (CANF) Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.
    £35.60
  • Link Pressure Sensor (PS150) Link Pressure Sensor (PS150)

    Link Pressure Sensor (PS150)

    Link Pressure Sensor (PS150) Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and WiringUp to 150 PSI above atmospheric pressure, cannot be used to read vacuum0.5v = 0bar / 0PsiG4.5v = 10 Bar / 145...
    £228.00
  • Link Razor PDM Link Razor PDM

    Link Razor PDM

    Link Razor PDM Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.The Razor PDM is a programmable device that uses logic for...
    £954.00
  • Link T100G4 - 100 Pack of Terminals Link T100G4 - 100 Pack of Terminals

    Link T100G4 - 100 Pack of Terminals

    Link T100G4 - 100 Pack of Terminals   Terminals - 100 pack.   Suits A, B, C and D G4, G4+ and G4X ECU connectors.  
    £62.00
  • Link TG4 - 20 Pack of Terminals Link TG4 - 20 Pack of Terminals

    Link TG4 - 20 Pack of Terminals

    Link TG4 - 20 Pack of Terminals   Terminals - 20 pack.   Suits A, B, C and D G4, G4+ and G4X ECU connectors.  
    £34.20
  • Link Three Channel Inductive Igniter (I3) Link Three Channel Inductive Igniter (I3)

    Link Three Channel Inductive Igniter (I3)

    Link Three Channel Inductive Igniter (I3) This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters.Common uses include: wasted spark on 6 cylinder engines, coil-per-plug...
    £172.40
  • Link Throttle Position Sensor (TPSCW/CCW)

    Link Throttle Position Sensor (TPSCW/CCW)

    Link Throttle Position Sensor (TPSCW/CCW) Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.Features 8 mm D-Shaft Rotary Sensor Hall Effect non-contact...
    £199.00
  • Link Trigger Wheel (TWL)

    Link Trigger Wheel (TWL)

    Link Trigger Wheel (TWL)   Large Diameter Trigger wheel – Small and Medium sizes also available.   60-2 tooth 200mm diameter 40mm centre
    £93.20
  • Link Trigger Wheel (TWM)

    Link Trigger Wheel (TWM)

    Link Trigger Wheel (TWM) Medium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre  
    £93.20
  • Link Trigger Wheel (TWS)

    Link Trigger Wheel (TWS)

    Link Trigger Wheel (TWS) Small Diameter Trigger wheel – Medium and Large sizes also available.  24 tooth 150mm diameter 40mm centre  
    £93.20
  • Link Tuning Cable (CANSER)

    Link Tuning Cable (CANSER)

    Link Tuning Cable (CANSER) Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is also available. Compatible with: Link G4X Storm  Link G4X and G4+...
    £70.40
  • Link Tuning Cable (CUSB)

    Link Tuning Cable (CUSB)

    Link Tuning Cable (CUSB) Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X Storm  Link G4X and G4+ Fury  Link G4X and G4+ Xtreme Link G4+...
    £70.40
  • Link Wideband O2 Sensor (LSU49)

    Link Wideband O2 Sensor (LSU49)

    Link Wideband O2 Sensor (LSU49) This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control...
    £149.00
  • Link XS Expansion Loom - #XSL

    Link XS Expansion Loom - #XSL

    Link XS Expansion Loom - #XSL Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the...
    £56.00
  • LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6

    LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6

    LSU4.9 Wideband adaptor harness - LSU4.9 to DTM6   SUITS: NEXUS Series devices   INCLUDES: 1 x HT-010726 LSU4.9 to DTM-6 Harness   NOTES: Plug'n'Play with NEXUS series harnesses
    £25.00
  • LSU4.9 Wideband Hardware Pack

    LSU4.9 Wideband Hardware Pack

    LSU4.9 Wideband Hardware Pack Suits: Nexus Series devices Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung Notes: Plug and Play with NEXUS Series Harnesses  
    £154.00
  • MiniLink - MINIX

    MiniLink - MINIX

    MiniLink - MINIX G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. Our BMW Mini ECU comes in its own case which fits directly into the factory location. Installation is a breeze,...
    £1,568.00
  • MR2Link V1 - TST185X MR2Link V1 - TST185X

    MR2Link V1 - TST185X

    MR2Link V1 - TST185X Easy to install. Affordable. Reliable.   G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure...
    £1,328.00