ECU/PDM/ELECTRONIC SYSTEM

Linear Position Sensor - 1/2" - 100mm Travel - Length: Between Mounting Holes (Closed) 217mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position   Ingress Protection Rating - IP65   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x...

Linear Position Sensor - 1/2" - 150mm Travel - Length: Between Mounting Holes (Closed) 267mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position   Ingress Protection Rating - IP65   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x...

Linear Position Sensor - 1/2" - 200mm Travel - Length: Between Mounting Holes (Closed) 317mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Ingress Protection Rating - IP65   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x Opposing...

Linear Position Sensor - 1/2" - 250mm Travel - Length: Between Mounting Holes (Closed) 367mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position.   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon...

Linear Position Sensor - 1/2" - 50mm Travel - Length: Between Mounting Holes (Closed) 167mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon...

Link 1.15 Bar MAP Sensor (MAP1.15)

The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar (approx 2 PSI) are...

Link 140 Bar Pressure Sensor (HPS)

High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit Technical Specs:Up to 2030 PSI above atmospheric pressure, cannot be used to read vacuum Technical Specs

Link 2.5 Bar MAP Sensor (MAP2.5)

The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The wiring pinout for this sensor is marked directly on the...

Link 3 Bar MAP Sensor (MAP3)

This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is indicated on the sensor.  ...

Link 4 Bar MAP Sensor (MAP4)

The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring pinout for this sensor is marked directly on the sensor...

Link 5 Bar MAP Sensor EU (MAP5EU)

The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4 Bar (or 58psi) of boost pressure. Includes Plug and Pins Push wire through connector; crimp on...

Link 8 Bar MAP Sensor EU (MAP8EU)

The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 7 Bar (or 101psi) of boost pressure.  Includes Plug and Pins Push wire through connector;...

Link A Loom Long - #5LA

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

Link A Loom Medium - #2LA

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

Link A Loom Short - #0LA

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour...

Link Adaptor - M10 x 1 Female to 1/8 NPT Male

Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male. Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports.

Link Air Temp Sensor (IAT1-8)

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" BSP Thread

Link Air Temperature Sensor (IATB)

Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)

Link B Loom Long - #5LB

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

Link B Loom Medium - #2LB

2.5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

Link B Loom Short - #0LB

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour...

Link BG4 - 10 Pack Blanking Plugs

Blanking plugs for unused terminal positions - 10 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Link BG4 - 100 Pack Blanking Plugs

Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Link BG4 - 20 Pack Blanking Plugs

Blanking plugs for unused terminal positions - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

Link Boost Control Solenoid - 3 Port (3BCS)

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and boost levels can be raised to...

Link Boost Control Solenoid - 4 Port (4BCS)

Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4-port boost control soldenoids are commonly used for big boost applications, boost levels can be raised as...

Link Bosch 2-Way Plug Kit (PKB2)

Bosch 2 way plug kit. Useful for a variety of applications. Most commonly paired with Bosch Fuel Injectors.Includes 2 way Bosch Style Plug, pins and rubber boot

Link Bosch 3-Way Plug Kit (PKB3)

Bosch 3 Way Plug Kit  

Link Bosch 7-Way Plug Kit (PKB7)

7 way Bosch Style Plug, pin and Boot

Link Bosch EV14 1000C Injector (Set of 4)

4 x EV14 1000cc fuel injectors in their unmodified form as they come from Bosch. Injectors are tested and graded into flow matched batches by Bosch prior to sale. We sell these as a matched set of 4 injectors.These injectors are specifically designed by...

Link Cable (USBM)

USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon

Link Cable - (CANPCB)

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. 

Link CAN Gauge OLED - 52mm

The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters such as boost pressure, air/fuel ratio, coolant temperature, fuel pressure, ethanol content, etc. can be displayed...

Link CAN Keypad - 12 Button

Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The keypad is designed for ultimate reliability - IP67/IP69K water and...

Link CAN Keypad - 4 Button

Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately). Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups. The keypad is designed for ultimate reliability - IP67/IP69K water...

Link CAN Keypad - 8 Button

Rugged 8 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The keypad is designed for ultimate reliability - IP67/IP69K water and...

Link CAN Lambda - (CANLAM)

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.  If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to...

Link CAN Splitter Cable - CANTEE

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices.   Specs DTM4 Female to 2 x DTM4 Male. Includes CAN and Power Wiring.  Loom 1 Length: 80mm  Loom 2 Length:...

Link CANEXT - CAN Extension Cable - 2m

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s.   Specs DTM4 Female to DTM4 Male. Includes CAN and Power Wiring. Length: 2 metres   DTM4 Pin Out Pin 4: CAN H Pin 3: CAN L Pin...

Link CANJST - CAN Connection Cable for Plugin ECU's (5 Pin)

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead. Terminates to a DTM4 Male Connector which is compatible with other...