• PDM25
• 4x Deutch DT Connectors + contacts
• USB memory stick with PDM software and instructions preloaded
• USB Cable
• M8 ring terminal & cover

Advantages Over Fuses and Relays

• Greatly simplifies system wiring and reduces system component count.

• Reduces the weight of the electrical system.

• Provides increased reliability over traditional systems using mechanical relays. 

• Solid state technology removes the problem of relay contact corrosion and relay bouncing in vibration heavy applications.

• Smart features such as indicator and wiper motor modes remove the need for extra control units.

• Current draw can be monitored and logged to pre-emptively detect faults.

General Features

• Size: 200x160x54mm

• Weight: 660g

• Operating Temperature: -55°C to 90°C (-67°F to 194°F)

• Construction: Glass Fibre Reinforced Plastic

• IP Rating: IP67

• Connectors: Deutsch DT 12-Pin

• Update Rate: Up to 800Hz

Inputs

• Type: 16 Analogue inputs, which can also serve as digital inputs

• Measurement Range: Each input can measure between 0V-6V

• Measurement Resolution: 10-Bit, or 0.01V

• Protection: Fully protected for input voltages from -24V to 40V 

• Added Features: Current sourcing for ground switch detection. Configure as active high or low. Configurable Hysteresis voltage. Latching or momentary operation.

Outputs

• Type: 25 High side outputs 80A peak, 20A continuous.

• Combined: 180A combined output maximum current

• Output Current Control Steps: 100mA (0.1A)

• Protection: Each output is overcurrent, overtemperature, load dump and reverse polarity protected.

• 5V: One 5V, 500mA output for supplying external sensors/Hardwire Electronics CAN Keypad

• Added Features: Outputs can be configured to stay on for a specified time after the input is removed, useful for thermo-fans. Outputs can be retried multiple times after an over-current event is detected.

Data Logging

• Storage: 128Mb of onboard flash storage for logging PDM data

• Speed: 0.1Hz to 50Hz

• Viewing: Data can be downloaded and graphed via the Hardwire Electronics PDM configurator software

Functions

• Output Functions: Each Output can be switched with a user defined function

• Logical Operators: AND, OR, NOR, XOR, NAND, NOR, >, >=, <, <=, Equal, Not Equal

Bluetooth

• Version: Bluetooth v4.0

• App: Available in future software update

USB

• Type: USB 2.0 Compliant Mini-B

• Driver: Integrated driver for Windows 10

CAN Bus

• Interface: 1x CAN2.0A/B

• Bus Speed: 50kbps, 100kbps, 125kbps, 250kbps, 500kbps, 1000kbps

• Input Stream: 40 Inputs, fully customisable variable parsing with bit masking and math functions. A range of CAN config files are available to comunicate with common ECUs.

• Output Stream: 40 Outputs, fully customisable CAN frame construction with math functions