LINK ENGINE MANAGEMENT

Link Coolant Temperature Sensor (NTC12)

Link Coolant Temperature Sensor (NTC12) Includes Plug Kit - 2 way Bosch Style plug, terminals and boot M12 Thread

Link Crank Angle Sensor (CAS)

Link Crank Angle Sensor (CAS) Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related...

Link Deutsch 2-Way Plug Kit - #PKD2F

Link Deutsch 2-Way Plug Kit - #PKD2F Deutsch 2-Way Plug Kit

Link Deutsch 3-Way Plug Kit (PKG3)

Link Deutsch 3-Way Plug Kit (PKG3) Deutsch 3 Way Plug Kit

Link Deutsch DTM4 Connector Kit (Female)

Link Deutsch DTM4 Connector Kit (Female) Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes Female Housing...

Link Deutsch DTM4 Connector Plug Kit (Male)

Link Deutsch DTM4 Connector Plug Kit (Male) Deutsch DTM4 Connector Kit (Male) to create your own looms. DTM4 Male housing. Includes wedgelock and sockets.

Link Dual Core Cable - #C2C10

Link Dual Core Cable - #C2C10 Dual core screen cable for use with trigger signals and knock sensors - 10m per pack  

Link E-Throttle G4 (G4RET)

Link E-Throttle G4 (G4RET) Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above) to give you full...

Link Ethanol Content Sensor - #ECS

Link Ethanol Content Sensor - #ECS Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle...

Link Exhaust Gas Temperature Probe (EGT)

Link Exhaust Gas Temperature Probe (EGT) Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable...

Link G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK)

Link G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK) Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning...

Link G4+ Thunder

Link G4+ Thunder The Thunder is designed for high end applications requiring maximum performance, flexibility and tuning control. The Thunder has more inputs, more outputs and more features than any...

Link G4+ Xtreme

Link G4+ Xtreme The Xtreme has Peak and Hold Injection, built in E-throttle and all the advanced features including Anti-lag, Cruise Control and Traction Control With 8 Peak and Hold Injector...

Link G4X AtomX

Link G4X AtomX The Link G4X AtomX ECU is the latest version of our entry-level ECU. Don't let its size fool you however, the AtomX has expanded data logging and uses the same microcontroller as the...

Link G4X FuryX

Link G4X FuryX The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. Now on the G4X platform, the FuryX features a faster processor, faster...

Link G4X MonsoonX

Link G4X MonsoonX The MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data at a faster sample rate. Control loops are also more precise compared to...

Link G4X StormX

Link G4X StormX The Link G4X StormX ECU is the latest version of our trusty, mid-sized ECU. With eight injector and eight ignition drives, it allows sequential injection and direct spark on engines...

Link G4X XtremeX

Link G4X XtremeX The XtremeX has built in E-throttle and all the advanced features including Anti-lag, Cruise Control and Traction Control.With 8 Injector drives and 8 ignition drives the XtremeX can...

Link Housing & Terminals (TK G1 LEM)

Link Housing & Terminals (TK G1 LEM) To suit G1 models. 17 way housing and terminals

Link Housing & Terminals (TK G3 LEM)

Link Housing & Terminals (TK G3 LEM) To suit G3 LEM models only. 26 way housing and terminals.

Link Knock Sensor (KNS)

Link Knock Sensor (KNS) Donut style 8mm hole Includes plug and pin kit 

Link Knock Sensor with Loom (KNSB)

Link Knock Sensor with Loom (KNSB) Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.

Link KnockBlock G4+ (KNB)

Link KnockBlock G4+ (KNB) The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mechanical issues. It is used...

Link KnockLink G4 (G4KNL)

Link KnockLink G4 (G4KNL) KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock sensor to function (sold...

Link Loom Crimping Tool (CTS)

Link Loom Crimping Tool (CTS) Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors. 

Link Loom Crimping Tool (CTSS)

Link Loom Crimping Tool (CTSS) Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors. 

Link Loom G1 / G2 LinkPlus X2ML

Link Loom G1 / G2 LinkPlus X2ML 2 metres. To suit G1 / G2 LinkPlus models. 

Link Mounting Boss - Aluminium (IATBMA)

Link Mounting Boss - Aluminium (IATBMA) Weld-in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange.

Link Mounting Bracket for G4+ & G4X Atom & Monsoon (MTB2)

Link Mounting Bracket for G4+ & G4X Atom & Monsoon (MTB2)  

Link Mounting Bracket for G4+ & G4X Fury, Xtreme, Storm, Force (MTB1)

Link Mounting Bracket for G4+ & G4X Fury, Xtreme, Storm, Force (MTB1)

Link Mounting Bracket for G4+ Thunder (MTB3)

Link Mounting Bracket for G4+ Thunder (MTB3)

Link MXG Strada 7" Dash - Race Edition

Link MXG Strada 7" Dash - Race Edition Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Race Edition is a full colour, 7-inch dash display with 10 RGB shift lights and eight...

Link MXG Strada 7" Dash - Street Edition

Link MXG Strada 7" Dash - Street Edition Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB...

Link MXS Strada 5" Dash - Race Edition

Link MXS Strada 5" Dash - Race Edition Link MXS Strada 5" Dash, powered by AIM.The Link MXS Strada Race Edition is a full colour, 5-inch dash display with 10 RGB shift lights and six customisable...

Link MXS Strada 5" Dash - Street Edition

Link MXS Strada 5" Dash - Street Edition Link MXS Strada 5” dash, powered by AIM.The Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB...

Link O2 Bung and Plug

Link O2 Bung and Plug Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.

Link Old G4 Atom & Lightning - 5m (5LT)

Link Old G4 Atom & Lightning - 5m (5LT) 5M To suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom

Link Pin Kit A - #TKA

Link Pin Kit A - #TKA Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be required for the...

Link Pin Kit B - #TKB

Link Pin Kit B - #TKB Equivalent plug and connectors as "B" Loom. Plug and Pin Kit only.Suitable for: Link G4X Storm (Loom A/Pin Kit A also required) Link G4X and G4+ Fury (Loom A/Pin Kit A also...

Link Pin Kit C - #TKC

Link Pin Kit C - #TKC Housing and 26 terminals for C connector. Plug and Pin Kit Only.Suitable for: G4+ Thunder Obsolete G4 Atom and Lightning. (Not G4+ or G4X Atom)