LINK ENGINE MANAGEMENT

300ZLink - #N300X

300ZLink - #N300X G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure...

350ZLink - N350X

350ZLink - N350X G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU comes in its own enclosure, while installation is...

AiM GPS09 Module for AiM Dashes

AiM GPS09 Module for AiM Dashes Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceleration - all the...

AltezzaLink - TALTX

AltezzaLink - TALTX Easy to install. Affordable. Reliable.   G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car...

Ballast Resister (BAL)

Ballast Resister (BAL) For use with Low-Impedence Injectors. Includes a single 1 Ohm 50W resistor mounted to a heatsink.Please contact us to ensure compatibility with your injectors.

Ballast Resistor (BAL2)

Ballast Resistor (BAL2) For use with Low-Impedence Injectors. Includes set of 2 x 1 Ohm 50w resistors mounted to a heatsink. These are also sold in a single pack. Please contact us to ensure...

Ballast Resistor (BAL4)

Ballast Resistor (BAL4) For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance...

Ballast Resistor (BAL6)

Ballast Resistor (BAL6) For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance...

BMWLink - E36X

BMWLink - E36X   G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure...

CivicLink - #HC92X

CivicLink - #HC92X G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure...

CivicLink - #HC96X

CivicLink - #HC96X G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure...

E-Throttle Accelerator Pedal Module (PED)

E-Throttle Accelerator Pedal Module (PED) Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin...

Electronic Throttle Body Kit - 54mm (ETB54)

Electronic Throttle Body Kit - 54mm (ETB54) 54mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes...

Electronic Throttle Body Kit - 82mm (ETB82)

Electronic Throttle Body Kit - 82mm (ETB82) 82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes...

EVOLink (I-III) - EVO3X

EVOLink (I-III) - EVO3X G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure...

EVOLink (IV-VIII) - EVO8X

EVOLink (IV-VIII) - EVO8X G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure...

EVOLink - EVO9X

EVOLink - EVO9X G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation...

GTRLink - NGTRX

GTRLink - NGTRX G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation...

GTTLink - NGTTX

GTTLink - NGTTX G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure...

Hall Effect Sensor Kit

Hall Effect Sensor Kit Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current output. Typical...

JZX90Link - JZX90X

JZX90Link - JZX90X Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits...

JZXLink - JZX100X

JZXLink - JZX100X G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure...

Link 1.15 Bar MAP Sensor (MAP1.15)

Link 1.15 Bar MAP Sensor (MAP1.15) The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be...

Link 140 Bar Pressure Sensor (HPS)

Link 140 Bar Pressure Sensor (HPS) High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit Technical...

Link 2.5 Bar MAP Sensor (MAP2.5)

Link 2.5 Bar MAP Sensor (MAP2.5) The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx...

Link 3 Bar MAP Sensor (MAP3)

Link 3 Bar MAP Sensor (MAP3) This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost...

Link 4 Bar MAP Sensor (MAP4)

Link 4 Bar MAP Sensor (MAP4) The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of...

Link 5 Bar MAP Sensor EU (MAP5EU)

Link 5 Bar MAP Sensor EU (MAP5EU) The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4 Bar (or...

Link 8 Bar MAP Sensor EU (MAP8EU)

Link 8 Bar MAP Sensor EU (MAP8EU) The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 7 Bar...

Link A Loom Long - #5LA

Link A Loom Long - #5LA 5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector...

Link A Loom Medium - #2LA

Link A Loom Medium - #2LA 2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU...

Link A Loom Short - #0LA

Link A Loom Short - #0LA 0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU...

Link Adaptor - M10 x 1 Female to 1/8 NPT Male

Link Adaptor - M10 x 1 Female to 1/8 NPT Male Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male. Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports.

Link Air Temp Sensor (IAT1-8)

Link Air Temp Sensor (IAT1-8) Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" BSP Thread

Link Air Temperature Sensor (IATB)

Link Air Temperature Sensor (IATB) Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)

Link B Loom Long - #5LB

Link B Loom Long - #5LB 5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector...

Link B Loom Medium - #2LB

Link B Loom Medium - #2LB 2.5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU...

Link B Loom Short - #0LB

Link B Loom Short - #0LB 0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU...

Link BG4 - 10 Pack Blanking Plugs

Link BG4 - 10 Pack Blanking Plugs Blanking plugs for unused terminal positions - 10 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Link BG4 - 100 Pack Blanking Plugs

Link BG4 - 100 Pack Blanking Plugs Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.