INPUTS AND CAN EXPANSION PRODUCTS

CAN Adaptor Loom - DT-4 to DTM-4

LENGTH: 200mm   SUITS: CAN Keypad 2 x 4 and 3 x 5   INCLUDES: 1 x HT-130045 - Adaptor Harness   NOTES: CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad - 200mm

CAN Adaptor Loom DTM-4 to 6-Pin Circular Connector

CAN Adaptor Loom (DTM-4 to 6 pin Circular Connector ) - Suits Dual Connector Link ECU's   SUITS: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI)   INCLUDES: 1 x CAN Adaptor Loom (DTM-4 to 6-pin...

CAN Adaptor Loom DTM-4 to Flying Leads

CAN Adaptor Loom DTM-4 to Flying Leads   SUITS: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector   INCLUDES: 1 x HT-130046 CAN Adaptor Loom (DTM-4 to Flying leads)   NOTES: Suits aftermarket...

CAN Adaptor Loom DTM-4 to JST 5-Pin

CAN Adaptor Loom DTM-4 to JST 5-Pin   SUITS: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs   INCLUDES: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs   NOTES: Use with Link Plug-in range of ECUs

CAN Adaptor Loom DTM-4 to Minifit Jr

CAN Adaptor Loom DTM-4 to Minifit Jr   SUITS: Haltech iC-7 and Microtech ECUs   INCLUDES: 1 x HT-130049 Can Adaptor Loom   NOTES: Use with Microtech CAN Hub for direct plug and play

CAN Keypad Label Set

CAN Keypad Label Set A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN Keypads.   Suits: Haltech CAN Keypads Includes: 5 Label Sheet (140 individual labels) Notes: A selection of pre designed, semi transparent...

Coolant Temp Sensor - Large Thread - Thread: 3/8 NPT 18TPI

Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.  

Coolant Temp Sensor - Small Thread - Thread: M12 X 1.5

Coolant Temp Sensor - Small Thread M12 x 1.5 Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.    

Coolant Temp Sensor - Thread: 1/8 NPT 27TPI

Coolant Temp Sensor - 1/8 NPT Thread Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading.

Dual Switch Panel Kit

Dual Switch Panel Kit 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Dual Switch Panel Only - includes Yellow knob INCLUDES: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.  

Dual Switch Panel Only

Dual Switch Panel Only Dual Switch Panel Only - Includes Yellow Knob Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT included, Please order 2 x HT-010504 if required.

Elite CAN HUB 4 Port DTM-4

Elite CAN HUB 4 Port DTM-4   SUITS: For use with up to three CAN devices.   INCLUDES: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (12")   NOTES: Direct Plug 'n' Play compatible with an Elite ECU CAN port or Elite ECU...

Flex Fuel Composition Sensor

Flex Fuel Composition Sensor SUITS: 3/8 "GM Spring Lock" fittings. INCLUDES: Matching plug and 3 pins.  

Flex Fuel Fittings 3/8 "GM Spring Lock" - 6AN Male

Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male SUITS: GM Flex Fuel Sensors. INCLUDES: Two fittings.  

GPS Speed Input Module - Length: 300mm

GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Apllications that require a digital speed signal Includes: Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins Notes: Calibration: 5000ppk (5000 pulses...

GT101 Style High Frequency Hall Effect Sensor - Size: 18mm Diameter

GT101 Style High Frequency Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)  

Haltech 1/4" Mild Steel Weld-On Base Only

1/4" Mild steel weld-on base only    

Haltech 1/4" Mild Steel Weld-On Kit

1/4" Mild Steel Weld-on Kit - inc Nut and Ferrule   INCLUDES: Nut and ferrule.   NOTES: Compression ferrules are single use and must be replaced when replacing probes.

Haltech 1/4" Stainless Compression Fitting Kit

1/4" Stainless Compression Fitting Kit - 1/8" NPT Thread   THREAD: 1/8 NPT   INCLUDES: Nut and ferrule.   NOTES: Compression ferrules are single use and must be replaced when replacing probes.

Haltech 1/4" Stainless Steel Weld-On Base Only

1/4" Stainless steel weld-on base only

Haltech 1/4" Stainless Steel Weld-On Kit

1/4" Stainless Steel Weld-on Kit - inc Nut and Ferrule   INCLUDES: Nut and ferrule.   NOTES: Compression ferrules are single use and must be replaced when replacing probes.

Haltech Adaptor - Brass 1/8" NPTF to 3/8" NPTF

Adaptor - Brass 1/8"NPTF to 3/8"NPTF Suits: 1/8" NPT Sensors Includes: Adaptor Only Notes: Tightening Torque: 1.5 - 3 TPFT (Turns past finger tight)    

Haltech CAN Adaptor Cable DTM-4 Female Receptacle/Socket to 8 Pin Black Tyco

Haltech CAN Ada Cable DTM-4 F to 8 pin Black Tyco 75mm (3")   Suits: Used to adapt a Platinum series ECU to Elite DTM-4 CAN system.

Haltech Driveshaft Split Collar - 1.812" / 46mm I.D. 8 Magnet

Haltech Driveshaft Split Collar 1.812" / 46mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.812" I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup split collar - suits 1.812" / 46mm Driveshaft  

Haltech Driveshaft Split Collar - 1.875"/ 47.63mm I.D. 8 Magnet

Haltech Driveshaft Split Collar 1.875" / 47.63mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup collar - suits 1.875"/ 47.63mm Driveshaft      

Haltech Driveshaft Split Collar - 2.125" / 53.98mm I.D. 8 Magnet

Haltech Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup split collar - suits 2.125" / 53.98mm Driveshaft  

Haltech Driveshaft Split Collar - 2.187"\ 55.55mm I.D. 8 Magnet

Haltech Driveshaft Split Collar 2.187" / 55.55mmI.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.187"\ 55.55mm I.D. 8 Magnet Notes: 8 magnet pickup split collar - suits 2.187" Driveshaft    

Haltech Elite CAN Cable - DTM4 Receptacle to 16 Pin Black Tyco - Length: 150mm / 6"

Haltech Elite CAN Cable - DTM4 Receptacle to 16 pin Black Tyco - 150mm / 6"   Suits: Compatible Elite 550/750 Plug "n" Play Adaptor harness Includes: 1 x DTM4 Receptacle to Tyco 16 Position Connector  

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 1200mm (48")

Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 1200mm (48")

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 150mm (6")

Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 150mm (6")

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 1800mm (72")

Haltech Elite CAN Cable DTM-4 - 8 pin Black Tyco 1800mm (72")

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 300mm (12")

Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 300mm (12")  

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 600mm (24")

Haltech Elite CAN Cable DTM-4 - 8 pin Blk Tyco 600mm (24")  

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco - Length: 900mm (36")

Haltech Elite CAN Cable DTM-4 - 8 pin Black Tyco 900mm (36")

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 1200mm (48")

Haltech Elite CAN Cable DTM-4 to DTM-4 1200mm (48") Includes: 1 x DTM-4 to DTM-4 CAN Cable   

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 150mm (6")

Haltech Elite CAN Cable DTM-4 to DTM-4 150mm (6")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 1800mm (72")

Haltech Elite CAN Cable DTM-4 to DTM-4 1800mm (72")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 2400mm (92")

Haltech Elite CAN Cable DTM-4 to DTM-4 2400mm (92")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 3000mm (120")

Haltech Elite CAN Cable DTM-4 to DTM-4 3000mm (120")  

Haltech Elite CAN Cable DTM-4 to DTM-4 - Length: 300mm (12")

Haltech Elite CAN Cable DTM-4 to DTM-4 300mm (12")   Includes: 1 x CAN Connection Cable