OTHER

Hall Effect Sensor Kit

Hall Effect Sensor Kit Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current output. Typical automotive applications include: Crank & Cam...

Link 140 Bar Pressure Sensor (HPS)

Link 140 Bar Pressure Sensor (HPS) High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit Technical Specs: Up to 2030 PSI above atmospheric pressure, cannot be...

Link Crank Angle Sensor (CAS)

Link Crank Angle Sensor (CAS) Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related products for our trigger wheel options...

Link Ethanol Content Sensor - #ECS

Link Ethanol Content Sensor - #ECS Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible...

Link Exhaust Gas Temperature Probe (EGT)

Link Exhaust Gas Temperature Probe (EGT) Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected...

Link G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK)

Link G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK) Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race...

Link Knock Sensor (KNS)

Link Knock Sensor (KNS) Donut style 8mm hole Includes plug and pin kit 

Link Knock Sensor with Loom (KNSB)

Link Knock Sensor with Loom (KNSB) Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.

Link KnockBlock G4+ (KNB)

Link KnockBlock G4+ (KNB) The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mechanical issues. It is used it with ear buds, headphones or noise cancelling ear...

Link O2 Bung and Plug

Link O2 Bung and Plug Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.

Link Pressure Sensor (PS150)

Link Pressure Sensor (PS150) Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and WiringUp to 150 PSI above atmospheric pressure, cannot be used to read vacuum0.5v = 0bar / 0PsiG4.5v = 10 Bar / 145...

Link Throttle Position Sensor (TPSCW/CCW)

Link Throttle Position Sensor (TPSCW/CCW) Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.Features 8 mm D-Shaft Rotary Sensor Hall Effect non-contact...

Link Wideband O2 Sensor (LSU49)

Link Wideband O2 Sensor (LSU49) This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control...