HALTECH ECU PRODUCTS

Haltech Elite CAN Cable DTM-4 to OBDII - Length: 1800mm (72")

Notes: Vehicle side OBDII Connector Connect your Elite ECU to an OBDII Bluetooth or Wireless Module

Haltech HC5 - Hydraulic Crimper

HC5 Hydraulic Crimper 5 TON Suits: 00 AWG to 12AWG cable. Includes: 1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets - (Sizes 4,6,10,16,25,35,50,70mm2) 1 x Hydraulic Rebuild Kit 1 x Moulded Carry Case 1 x Quick Start Guide

Haltech iC-7 Colour Display Dash

Suits: All currrent Haltech ECUs via CAN. Also Plug'n'Play compatible with the following aftermarket ECU brands: Link, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series- (M400,600,800 gold box ECUs), Syvecs. Includes: Haltech iC-7 Display...

Haltech iC-7 OBD-II Colour Display Dash

SUITS: Preconfigured to connect directly (via CAN) to most late model vehicles (approx 2008-on) using the factory OBD-II port.   INCLUDES: Haltech iC-7 Display Dash, 34 Pin main connector harness (includes spare pins for input wiring), OBD-II to...

Haltech iC-7 OBDII to CAN Cable LENGTH: 1400mm / 55in

LENGTH: 1400mm / 55in   SUITS: Haltech iC-7 Dash   INCLUDES: Cable and Fuse   Haltech Dash to OBD II CAN Cable allows the Haltech iC-7 Dash to display the data obtained from the vehicles OBD II system in real time.

Haltech iC-7 Stand-Alone "Classic" Kit - Size: 7in

  Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electronically tested before packaging and are sold "as is" and without any further warranty...

Haltech M10 x 1.0 to 1/8 BSPT Adaptor

M10 x 1.0 to 1/8 BSPT Adaptor - Stainless Steel Suits: Bosch Fluid Pressure and Temperature Sensor - HT-010920 Includes: 1x M10x 1.0 to 1/8 BSPT Adaptor Notes: Use with Bosch Fluid Pressure and Temperature Sensor - HT-010920  

Haltech M10 x 1.0 to 1/8 NPT Adaptor

M10 x 1.0 to 1/8 NPT Adaptor - Thread: M10 x 1.0 Female to 1/8NPTF Male Suits: Bosch Fluid Pressure and Temperature Sensor - HT-010920 Includes: 1x M10x 1.0 to 1/8 NPT Adaptor Notes: Use with Bosch Fluid Pressure and Temperature Sensor - HT-010920 ...

Haltech O2 Sensor Weld-On Bung - 303 Stainless Steel

O2 Sensor Weld-On Bung - 303 Stainless Steel   THREAD: M18 x1.5   INCLUDES: 1 x weld-on bung - 303 Stainless Steel, 1 x copper washer and 1 x blanking plug.

Haltech O2 Sensor Weld-On Bung - 6061 Aluminium - Thread: M18 x 1.5

O2 Sensor Weld-On Bung - 6061 Aluminium Suits: M18 thread oxygen sensors. Includes: 1 x 6061 aluminium weld-on bung.

Haltech Tyre Cover - Size: 106cm x 91cm ( 42" x 36")

Haltech Tyre Cover Size: 106cm x 91cm ( 42" x 36") Keep the sun off your tyres and help maintain consistency in your tyre pressures. Includes 7 suction cup mounting points for mounting to steel or fibreglass bodies. To assemble, pull the included suction...

Haltech uC-10 Digital Dash - Size: 10in

OBDII functionality requires adapter cable HT-135003 (sold separately).   Suits: All current Haltech ECUs via CAN. Also Plug'n'Play compatible with the following aftermarket ECU brands: Link G4, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred...

Haltech Weld Fitting - Aluminum - Thread: 3/8 NPT 18 TPI

Weld fitting 3/8 NPT - Suit large air temp - Aluminum Suits: Air temp sensor - Large thread and coolant temp sensor - Large thread.  

Haltech Weld Fitting - Aluminum - Thread: M14 x 1.5

Weld fitting M14 x 1.5 - Small thread air temp - Aluminum Suits: Air temp Ssensor - Small thread.

Haltech Weld-On Fitting 1/8 NPT - 27 TPI - 6061 Aluminium - Size: 20.4mm x 13mm

Weld fitting 1/8 NPT - 27 TPI - 6061 Aluminium Includes: 1 x 1/8 NPT weld-on fitting  

Harness Sleeve Pack

Harness Sleeve Pack Includes: Nylon Sleeve 6mm x 10m 8mm x 5m 14mm x 2m 25mm x 1m Heatshrink glue lined 8mm x 1.2m 12mm x 0.6m 19mm x 0.3m 35mm x 0.12m Cable ties Small (100mm) x 20 Medium (200mm) x 10 Fleece Tape 1 x Roll Notes: Protect your cables and...

High Output CDI Coil

High Output CDI Coil Includes: Matching Delphi plug and pins.  

High Output IGN-1A Inductive Coil to GM LS V8 Adaptor Sub-Harness

8 Channel IGN-1A Inductive Coil to GM LS V8 Adaptor   Suits: A direct Plug 'n' Play solution to add high output IGN-1A inductive coils to all Haltech LS V8 terminated engine harnesses with the the OEM style 7 Pin coil harness connector. Must be in...

High Output IGN-1A Inductive Coil with Built-In Ignition Module

High Output IGN-1A Inductive Coil with Built-In Module Includes: Matching plug and pins. IGN1A

High Output Inductive Coil

High Output Inductive Coil  Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must be used with an ignitor ignitor/module.  

Hitachi "R35" Ignition Coil - Length: 140mm (Overall)

Hitachi "R35" Ignition Coil Length: 140mm ( Overall ) Suits: Coil on plug Conversions Includes: 1 x Genuine Hitachi Ignition Coil 1 x Plug and Pin Set Genuine Hitachi "R35" Ignition Coil with mating connector, pins, and seals. All dressed up with a...

HPI4 - High Power Igniter - 15 Amp Quad Channel Flying Lead Kit - Length: 2.0m (78")

HPI4 - High Power Igniter - 15 Amp Quad Channel Flying Lead Kit Length: 2.0m (78") INCLUDES: Flying Lead harness. HPI4 - High Power Igniter - Quad Channel - Module Only HPI8 - High Power Igniter - 2m Flying Lead Loom Only      

HPI4 - High Power Igniter - 15 Amp Quad Channel Module Only

HPI4 - High Power Igniter - 15 Amp Quad Channel Module Only HPI4 - High Power Igniter - Quad Channel - Module Only  

HPI4 - High Power Igniter - 15 Amp Quad Channel with Plug & Pins

HPI4 - High Power Igniter - 15 Amp Quad Channel with Plug & Pins Includes: Matching AMP 26 Pin 2 Row Superseal Connector and pins.   HPI4 - High Power Igniter - Quad Channel - Module Only Plug and Pins Only AMP 26 Pin 2 Row Superseal...

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Kit - Length: 2.0m (78")

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Kit Length: 2.0m (78") Includes: Flying Lead harness. HPI6 - High Power Igniter - Six Channel - Module Only HPI8 - High Power Igniter - 2m Flying Lead Loom Only

HPI6 - High Power Igniter - 15 Amp Six Channel Module Only

HPI6 - High Power Igniter - 15 Amp Six Channel Module Only HPI6 - High Power Igniter - Six Channel - Module Only  

HPI6 - High Power Igniter - 15 Amp Six Channel with Plug & Pins

HPI6 - High Power Igniter - 15 Amp Six Channel with Plug & Pins Includes: Matching AMP 26 Pin 2 Row Superseal Connector and pins. HPI6 - High Power Igniter - Six Channel - Module Only Plug and Pins Only AMP 26 Pin 2 Row Superseal Connector

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Kit - Length: 2.0m (78")

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Kit Length: 2.0m (78") Includes: Flying Lead harness. HPI8 - High Power Igniter - Eight- Channel - Module Only HPI8 - High Power Igniter - 2m Flying Lead Loom Only

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only - Length: 2.0m (78")

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78") HPI8 - High Power Igniter - 2m Flying Lead Loom Only

HPI8 - High Power Igniter - 15 Amp Eight Channel Module Only

HPI8 - High Power Igniter - 15 Amp Eight Channel Module Only HPI8 - High Power Igniter - Eight- Channel - Module Only  

HPI8 - High Power Igniter - 15 Amp Eight Channel with Plug & Pins

HPI8 - High Power Igniter - 15 Amp Eight Channel with Plug & Pins Includes: Matching AMP 26 Pin 2 Row Superseal Connector and pins. HPI8 - High Power Igniter - Eight- Channel - Module Only Plug and Pins Only AMP 26 Pin 2 Row Superseal...

iC-7 / uC-10 Standard Dash Mount

iC-7 / uC-10 Standard Dash Mount   Suits: Haltech iC-7 and uC-10 Display Dashes Includes: 1 x 2.5mm Black Annodized Aluminium Bracket 2.5mm Black Annodized Aluminium Bracket for iC-7 and uC-10 Digital Dashes.

iC-7 Moulded Panel Mount - Size: 250mm x 500mm (10" x 20")

IC-7 Moulded Panel Mount   SIZE: 250mm x 500mm (10" x 20")   SUITS: Haltech iC-7 Display Dash   INCLUDES: 1 x iC-7 Moulded Panel Mount- Black   NOTES: Suits Haltech IC-7 Display Dash Panel is textured. Made from UV stabilised ABS...

iC-7 Mounting Bracket with Integrated Visor

IC-7 Mounting Bracket with Integrated Visor   SUITS: Haltech iC-7 Display Dash   INCLUDES: 1 x 2.5mm Black Annodized Aluminium Bracket with integrated Visor and Laser Etched Haltech Logo   NOTES: Suits Haltech iC-7 Display Dash

iC-7 Sensor Pack for Stand-Alone Installations

Suits: iC-7 Semi Terminated Harness - HT-060300 Includes: 1 x HT-010304 Coolant Temp Sensor - 1/8 NPT Thread 1 x HT-120000 Adaptor - Brass 1/8"NPTF to 3/8"NPT 2 x HT-010904 150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensors   Please take care when...

iC-7 Tube Mount for Tube OD 31.75mm (1.25") - Size: 60mm X 44mm

IC-7 Dash Tube Mount 1.25 in Suits: iC-7 Mounting Brackets (HT-060070 and HT-060071) Includes: 1 x Annodized Dash Tube Mount 2 x Zinc M8 x 10 Bracket Mounting Screws 4 x Zinc M6 x 25 Assembly Screws Notes: Designed to mount optional dash mounting...

Idle Air Control Kit - Billet 2 Port Housing with 2 Screw Style Motor - Diameter: 10mm (3/8")

Idle Air Control Kit - Billet 2 Port Housing with 2 Screw Style Motor  Idle Air Control Kit - Haltech Billet Diameter: 10mm (3/8") Includes: Matching plugs and pins.

IO 12 Expander - 12 Channel (CAN ID - Box A)

As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or multiple CAN device installation using an Elite 4 Port CAN HUB. If you are connecting this product with a Platinum Pro Plug-in,...

IO 12 Expander - 12 Channel with Flying Lead Harness Kit (CAN ID - Box A) - Length: 2.5m (8')

IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or mutiple CAN device installation using an Elite 4 Port CAN HUB. If you are...

IO 12 Expander - 12 Channel with Flying Lead Harness Kit (CAN ID - Box B) - Length: 2.5m (8')

IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or mutiple CAN device installation using an Elite 4 Port CAN HUB. If you are...

IO 12 Expander - 12 Channel with Plug & Pins Kit (CAN ID - Box A)

Plug and Pins Only 24 Pin TYCO As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or mutiple CAN device installation using an Elite 4 Port CAN HUB. If you are connecting this product...

IO 12 Expander - 12 Channel with Plug & Pins Kit (CAN ID - Box B)

Plug and Pins Only 24 Pin TYCO As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or mutiple CAN device installation using an Elite 4 Port CAN HUB. If you are connecting this product...

IO 12 Expander Flying Lead Harness - Length: 2.5m (8')

IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only Suits: CAN ID - Box A or B

IO 12 Expander- 12 Channel (CAN ID - Box B)

Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inputs (AVI) Includes: IO 12 Expander, Elite CAN cable DTM-4 to 8 pin Black Tyco - 300mm (12") Notes: Combine two IO 12 Expanders with different CAN ID's (Box A or...

Knock Sensor - Genuine Bosch

Knock Sensor - Genuine Bosch Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins.    

Laser Ride Height Sensor

Laser Ride Height Sensor Length: 25mm (1") to 500mm (19.5") Range   Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deutsch DTM-3 Connector (HT-031001) , protective glass lens and setup guide.    

Linear Position Sensor - 1" - 100mm Travel - Length: Between Mounting Holes (Closed) 227mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Ingress Protection Rating - IP65   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x Opposing...

Linear Position Sensor - 1" - 150mm Travel - Length: Between Mounting Holes (Closed) 277mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Ingress Protection Rating - IP65   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x Opposing...

Linear Position Sensor - 1" - 200mm Travel - Length: Between Mounting Holes (Closed) 327mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Ingress Protection Rating - IP65   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x Opposing...

Linear Position Sensor - 1" - 250mm Travel - Length: Between Mounting Holes (Closed) 377mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position Ingress Protection Rating - IP65   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x Opposing...

Linear Position Sensor - 1/2" - 100mm Travel - Length: Between Mounting Holes (Closed) 217mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position   Ingress Protection Rating - IP65   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x...

Linear Position Sensor - 1/2" - 150mm Travel - Length: Between Mounting Holes (Closed) 267mm

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position   Ingress Protection Rating - IP65   Suits: All ECU's with spare AVI Includes: 1 x Sensor , 1 x...