STAINLESS-STEEL HARD LINE

5/16" Hard Line Compression Adaptor to 1/4"BSPP Female

This fittings is designed to convert metal hard fuel lines to AN thread sizes. The fitting is made from stainless steel and uses a twin-ferrule compression design. These fittings have many advantages over the common aluminium based hard line adaptors, as...

Compression Tee-Piece

This stainless steel compression tee is designed to be used with out 3/16", and 1/4" OD stainless steel hard line. It is ideal for use with MAC valve plumbing, or hard brake lines.

Hard Line Tube Clamp

This 2-part clamp is 3D printed from carbon-infused filament, which gives it excellent chemical and heat resistance. It is designed to be used with our 3/8" and 1/2" OD stainless steel fuel line, and can replace the stock brackets on the underside of the...

Hard Line Tube Clamp Bulkhead

This 2-part clamp is 3D printed from carbon-infused filament, which gives it excellent chemical and heat resistance. It is designed to be used with our 3/8" OD stainless steel fuel line at either end. It is spaced wide enough to accept 2 lines with...

Stainless Steel Compression Fittings for Hard Line

These fittings are designed to work with our stainless steel hard line. They are a double ferrule design and come supplied with assembly instructions (also available here).   We offer these fittings with an AN6, and AN8 male thread to suit the...

Stainless Steel Hard Line

Our stainless steel tube is perfect for replacing OEM hard fuel lines underneath the chassis, or anywhere else on the vehicle. It is made from 316 stainless steel and goes through a full annealing process, meaning it won't deform or crush when being bent...

Tube Bender for 10mm (3/8) and 12.7mm (1/2) Tube

This manual tube bender is perfect for forming our stainless steel hard line. It comes with clear bend angle markings to make it easier when forming accurate bends. This tool is only suitable for our 10mm (3/8") and 12.7mm (1/2") tube.

Tube Bender for 8mm and 10mm Tube

This manual tube bender is perfect for forming our stainless steel hard line. It comes with clear bend angle markings to make it easier when forming accurate bends. This tool is only suitable for our 8mm (5/16") and 10mm (3/8") tube.