null

LINK ECU PRODUCTS

Our Link ECU Products Range

  • Link Crank Angle Sensor (CAS) Link Crank Angle Sensor (CAS)

    Link Crank Angle Sensor (CAS)

    Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related products for our trigger wheel options.Features  Variable reluctance (reluctor)...
    £152.00
  • Link Deutsch DTM4 Connector Kit (Female) Link Deutsch DTM4 Connector Kit (Female)

    Link Deutsch DTM4 Connector Kit (Female)

    Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes Female Housing (Receptacle), Wedgelock & Pins
    £27.20
  • Link E-Throttle G4 (G4RET) Link E-Throttle G4 (G4RET)

    Link E-Throttle G4 (G4RET)

    Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above) to give you full control of your throttle setup, allowing a faster more precise throttle response...
    £308.00
  • Link Ethanol Content Sensor - #ECS Link Ethanol Content Sensor - #ECS

    Link Ethanol Content Sensor - #ECS

    Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and...
    £260.00
  • Link Exhaust Gas Temperature Probe (EGT)

    Link Exhaust Gas Temperature Probe (EGT)

    Extreme Duty Fast Response EGT Temperature Probe   Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test &...
    £144.08
  • Link G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK) Link G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK)

    Link G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK)

    Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race use.The G4 KnockLink is the only detonation warning device...
    £284.00
  • Link G4+ Thunder

    Link G4+ Thunder

    The Thunder is designed for high end applications requiring maximum performance, flexibility and tuning control. The Thunder has more inputs, more outputs and more features than any other Link ECU. The Thunder has all the features found on other...
    £2,384.00
  • Link G4+ Xtreme

    Link G4+ Xtreme

    The Xtreme has Peak and Hold Injection, built in E-throttle and all the advanced features including Anti-lag, Cruise Control and Traction Control   With 8 Peak and Hold Injector drives and 8 ignition drives the Xtreme can control up to 4 rotors or...
    £1,724.00
  • Link G4X AtomX

    Link G4X AtomX

    The Link G4X AtomX ECU is the latest version of our entry-level ECU. Don't let its size fool you however, the AtomX has expanded data logging and uses the same microcontroller as the entire G4X range! It is more responsive and has higher bandwidth than...
    £848.00
  • Link G4X FuryX

    Link G4X FuryX

    The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. Now on the G4X platform, the FuryX features a faster processor, faster communications & a huge 512 megabytes of data logging!   With 8 injector...
    £1,994.00
  • Link G4X MonsoonX

    Link G4X MonsoonX

    The MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data at a faster sample rate. Control loops are also more precise compared to its G4+ predecessor, along with advancements such as single precision...
    £1,088.00
  • Link G4X StormX

    Link G4X StormX

    The Link G4X StormX ECU is the latest version of our trusty, mid-sized ECU. With eight injector and eight ignition drives, it allows sequential injection and direct spark on engines with up to eight cylinders or four rotors.   The StormX has all...
    £1,568.00
  • Link G4X XtremeX

    Link G4X XtremeX

    The XtremeX has built in E-throttle and all the advanced features including Anti-lag, Cruise Control and Traction Control.With 8 Injector drives and 8 ignition drives the XtremeX can control up to 4 rotors or 8 cylinders with sequential injection and...
    £1,754.00
  • Link Knock Sensor with Loom (KNSB) Link Knock Sensor with Loom (KNSB)

    Link Knock Sensor with Loom (KNSB)

    Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.
    £122.00
  • Link KnockBlock G4+ (KNB) Link KnockBlock G4+ (KNB)

    Link KnockBlock G4+ (KNB)

    The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mechanical issues. It is used it with ear buds, headphones or noise cancelling ear muffs and features special...
    £499.99
  • Link KnockLink G4 (G4KNL) Link KnockLink G4 (G4KNL)

    Link KnockLink G4 (G4KNL)

    KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock sensor to function (sold separately) or you can purchase the KnockLink Kit that includes the Knock Sensor and Loom...
    £218.00
  • Link Loom Crimping Tool (CTS)

    Link Loom Crimping Tool (CTS)

    Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors. 
    £108.80
  • Link Loom Crimping Tool (CTSS) Link Loom Crimping Tool (CTSS)

    Link Loom Crimping Tool (CTSS)

    Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors. 
    £116.00
  • Link Mounting Boss (IAT1-8MA)

    Link Mounting Boss (IAT1-8MA)

    Link Mounting Boss (IAT1-8MA) Weld-in aluminium boss, 1/8" BSP thread. Suitable for mounting intake air temperature (IAT1-8), coolant temperature sensors (NTC1-8), and other sensors that use 1/8" BSP thread.
    £21.60
  • Link Mounting Boss (IAT1-8MS)

    Link Mounting Boss (IAT1-8MS)

    Link Mounting Boss (IAT1-8MS) Weld-in steel boss, 1/8" BSP thread. Suitable for mounting intake air temperature (IAT1-8), coolant temperature sensors (NTC1-8), and other sensors that use 1/8" BSP thread.
    £18.00
  • Link Mounting Boss - Aluminium (IATBMA) Link Mounting Boss - Aluminium (IATBMA)

    Link Mounting Boss - Aluminium (IATBMA)

    Weld-in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange.
    £35.60
  • Link Mounting Boss Steel (IATBMS)

    Link Mounting Boss Steel (IATBMS)

    Link Mounting Boss Steel (IATBMS) Weld-in steel boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch-style flange.
    £21.60
  • Link MXG Strada 7" Dash - Race Edition

    Link MXG Strada 7" Dash - Race Edition

    Details Features Specifications Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Race Edition is a full colour, 7-inch dash display with 10 RGB shift lights and eight customisable alarm LED lights. The dash is pre-configured to work...
    £1,472.00
  • Link MXG Strada 7" Dash - Street Edition

    Link MXG Strada 7" Dash - Street Edition

    Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link...
    £1,472.00
  • Link MXS Strada 5" Dash - Race Edition

    Link MXS Strada 5" Dash - Race Edition

    Link MXS Strada 5" Dash, powered by AIM.The Link MXS Strada Race Edition is a full colour, 5-inch dash display with 10 RGB shift lights and six customisable alarm LED lights. The dash is pre-configured to work with all Link G4+/G4X Wire-In and Plugin...
    £1,224.00
  • Link MXS Strada 5" Dash - Street Edition

    Link MXS Strada 5" Dash - Street Edition

    Link MXS Strada 5” dash, powered by AIM.The Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link...
    £1,224.00
  • Link O2 Bung and Plug

    Link O2 Bung and Plug

    Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.
    £35.60